SPECIFICATIONS

Capacity: 8L/2.1gal

Exhaust Pipe Length: 0.6m/1.96ft

Plug: US-Standard

Power Source: Corded Electric

Rated Power: 1500W

Rated Pressure: 0.7MPa

Reserved Installation Height: 100mm/3.94inch

Temperature Regulation Range: 30-65°C/86-149°F

Type: Kitchen Faucet Accessories

Waterproof Level: IPx4

Electric Water Heater, 110V 1500W Wall Mount Water Heater w/Tank, On Demand Instant Hot Water Heaters, Under Sink Plug in WaterHeaters for Kitchen Bathroom (Top Water Inlet, G1/2 threads)

Description

Do you live in a place with limited space and worry about insufficient hot water supply? This mini-tank water heater can quickly heat water and has good insulation. It can also provide you with a continuous supply of warm water through automatic water replenishment, making your winter no longer cold and feel the warmth of home!

It is very suitable for being installed in areas such as kitchens, bathrooms, RVs, etc. that require hot water but have limited space.

Specifications

Color: White
Shape: Rectangle
Material: 304 Stainless Steel, 316L Stainless Steel, ABS
Water Inlet Mode: Top Water Inlet
Style: Vertical
Plug: US-Standard
Wire Type: Plug-In
Power Source: Corded Electric
Number of Items: 1
Capacity: 8L/2.1gal
Temperature Regulation Range: 30-65°C/86-149°F
Power Cord Length: 0.9m/2.95ft
Voltage: 110V
Exhaust Pipe Length: 0.6m/1.96ft
Rated Power: 1500W
Rated Pressure: 0.7MPa
Waterproof Level: IPx4
Reserved Installation Height: 100mm/3.94inch
Gross Weight: 4.25kg/9.37lbs
Net Weight: 3.9kg/8.59lbs
Product Size: 27.9*21*28cm/10.98*8.27*11.02in
Package Size: 37*35*34cm/14.56*13.78*13.38in

Package Included

1*Electric Water Heater
1*Safety Valve
1*Exhaust Pipe
1*English Manual
All Accessories for Assembly

Notes

1.When used for the first time, please fill the water first and then power it later.
2.For your safety, please properly connect the ground wire and do not use a mobile socket.
3.Please note it is strictly forbidden to plug the outlet of a one-way relief valve, and the additional pressure is greater when the inner tank is heated by thermal expansion. At 0.75 mpa, the one-way safety valve will automatically drip and release pressure to ensure safety.
4.The connection pipe of the water supply pipe and water heater must be all metal tubes. not plastic.
5.When not in use for a long time (over 24 hours), please turn off the water supply and disconnect the power supply.
6.Please note that the installation of this product requires the following conditions: running water with a water pressure of 0.1MPA, a cold and hot type faucet, and a three-plug power socket (the installation position of the water supply tower should have a drop of more than 5 meters from the water tower).
7.Please note that this product can only be installed vertically. It is recommended to install it under the water basin. And install the anti-electricity wall at the red hot water outlet and the pressure relief valve at the blue cold water inlet.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.